MobiLincTake Control of Your Home

SmartLinc 2412N

Initial Setup

1. Plug the SmartLinc 2412N into your electrical outlet and connect the network cable to the router.
***NOTE: MobiLinc is only compatible with Firmware Version 3.x of the SmartLinc. You can find the firmware version by following these steps here: SmartLinc Version Info
2. Connect your iOS or Android device to the same home network as the SmartLinc 2412N.
3. For iOS devices, download MobiLinc HD, MobiLinc Pro, or MobiLinc Lite, from the App Store.
4. For Android devices, download MobiLinc Pro or MobiLinc Lite from the Android Market or purchase from the MobiLinc Store directly.

Configuration

1. Start MobiLinc. On startup, MobiLinc searches for any SmartLinc 2412N devices attached to your network.
2. Once found, MobiLinc will promo for the SmartLinc username and password. This only needs to entered once; MobiLinc will remember the login information on subsequent use. Username and Password changes are modified on the "My Settings->Lighting controller" page of MobiLinc.
3. MobiLinc syncs with SmartLinc. By syncing with SmartLinc, MobiLinc downloads all devices and scenes configured in SmartLinc right to your iPad, iPhone, iPod Touch, or Android device.

Troubleshooting

Check that from a local computer you can reach your SmartLinc by going to smartlinc.smarthome.com and clicking on "I'm at Home". If you cannot reach your SmartLinc through the website then please reboot the SmartLinc and try again.

If you are experiencing other problems communicating to SmartLinc with MobiLinc please visit this forum topic for troubleshooting help: Troubleshooting MobiLinc and SmartLinc