I have a large Insteon setup in my home (75+ devices) including SwitchLinc, KPL, TriggerLinc, IOLinc, ELK M!Gold.
I programmed a number of devices locally to allow one switch to control another, etc... When I installed the ISY994, I further refined my setup by creating 2 way links between devices (as controllers) to maintain accurate state on each switch.
My issue is that MobiLinc HD does not at all show the correct state for any of my devices. I am running the latest version of everything and did an "Update all" a number of times, reset the PLM, but no luck. I also have a hard wired phase coupler in my breaker panel, so I don't think my issue is with communications?
I did replaced the PLM (not sure if I tried a restore PLM or delete PLM & then ADD PLM). I am using a 2413S PLM.
I want to correct my issues, but would prefer not to walk around to each switch and do a reset.
Is there any way to delete the local programming, but maintain the ISY configuration?
Is there any advantage I have by keeping local links (beyond devices still working if my ISY is offline)?
What procedure should I follow to do this the easiest way?
Not sure what order to do things in and trying at all costs to not have to manually reset every device.
Can the ISY delete local links not done through it's interface?
Any help would be appreciated.