I use and enjoy mobilinc every day. However, I have some zwave devices that seem to be missing, and/or misclassified in mobilinc.
I just got started wth zwave on my ISY994 4.2.2 Zwave 4.55
Aeon Labs DSB09104-ZWUS Z-Wave Home Energy Monitor
Radio Thermostat CT30 with Z-Wave USNAP Module RTZW-01
ISY sees and reports power/voltage from “ Aeon home energy monitor”
ISY sees and reports temperature/controls CT30 thermostat
Here are the issues
Ipad mini ios 7.1.1 with mobilinc pro 4.00.1
Sees “home energy monitor” as a light switch (no voltage or watts/power). Reports it as OFF and no options
Sees CT30 as thermostat and can control thermostat - OK
Itouch ios 6.16 with mobilinc pro 3.22.03
Sees “home energy monitor” as a light switch (no voltage or watts/power). Reports it as OFF and no options
Does NOT see CT30 at all
Nexus tablet v2 android 4.4.2 mobilinc pro 1.2.4
Sees “home energy monitor” as a light switch (no voltage or watts/power). Reports it as OFF and no options
Sees CT30 as a light DIMMER, and reports levels like 27% that seem to vary with temperature
I have rebooted; resynced and reset my mobilinc apps a few times. However, mobilinc is always confused by the zwave “home energy monitor” and on some versions sees/controls a zwave thermostat, sometimes never sees the zwave thermostat and sometimes thinks the zwave thermostat is a light dimmer.
Suggestions?
Thanks.